What are the connection methods of gate valves for hydropower stations

Gate valves used in hydropower stations are often in a relatively special working environment, which also puts forward high requirements on the quality of the gate valves. Among them, the connection method it uses is also an important process composition. What we are going to share today is about the connection method of gate valves for hydropower stations.

The most common connection method used in gate valves of hydropower stations is mainly flange connection. This connection method is usually two flange pieces plus a number of fastening bolts and nuts, and the pipes are connected by pressing the middle flange gasket. Why do you think that flange connection is the most suitable method for gate valves in hydropower stations? This is mainly because the flange connection can withstand high-strength tensile, compression, torsion and shear resistance. The flange connection is a detachable joint, which has the advantages of convenient disassembly, high connection strength, and good tightness.
According to the shape of the joint surface, the flange connection can be divided into: smooth type, used for gate valves with low pressure; concave-convex type; tongue and groove type: widely used in corrosive media, with better sealing effect; trapezoidal groove type: Use an oval metal ring as a washer, which is used for gate valves with a working pressure of ≥64 kg/cm², or high-temperature gate valves; lens type: the washer is in the shape of a lens and is made of metal. Used for high-pressure gate valves or high-temperature gate valves with working pressure ≥100 kg/cm²; O-ring type: This is a newer form of flange connection, which is developed with the appearance of various rubber O-rings As a result, it is more reliable than ordinary flat gaskets in terms of sealing effect. In addition to flange connection, there is also threaded connection or ferrule connection, which is a simple connection method that can reliably prevent leakage and so on.
After a brief introduction, do you have your own ideas for the selection of gate valves for hydropower stations? If you need a gate valve for a hydropower station, please first consider Tanghai Valve. The gate valve produced by Tanghai Valve is mainly used in normal temperature and pressure environment, professional and high-quality, and professional technicians will give reasonable suggestions according to your working conditions, so that you can easily choose the right one. Of valve products, you are welcome to contact us at any time.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Related news/knowledge:
Hard seal installation method of ball valve
Classification of check valves
Representation method of electric gate valve model
Pneumatic gate valve model preparation method