TH VALVE • PROFESSIONAL VALVE MANUFACTURER
GET IN TOUCH WITH US
Cell: 0086-185 2639 6136
0086-133 7031 7626
E-mail: tanghai@tanghaivalve.com
info@tanghaivalve.com
Web: www.tanghaivalve.com
Add: East of Guanghui Road, Beizhakou town, Jinnan District, Tianjin, P.R.China.
© Copyright 2020 Tianjin Tanghaidongyang Valve Co., Ltd. All Rights Reserved.
Top Valve Manufacturer, Provide the best solutions for valve projects.
How to prevent the motor of electric flange butterfly valve from overloading
The torque and axial force of the valve electric actuator are limited, so usually the valve electric device uses a torque-limiting coupling. Most of the torque type is three-jaw connection or key connection, and the valve electric device does not bear the axial thrust. Most of the thrust type is threaded connection, which can bear […]
Common leakage problems and remedies of resilient-seated gate valves
The resilient seated flange gate valve is an updated product of the gate valve, because the gate plate is wrapped by elastic materials such as rubber or PTFE, or the valve seat is made of elastic material. In short, one of the valve seat and the valve plate can be regarded as soft seal. The […]
How to select electric actuator of the electric regulating butterfly valve
The valve electric actuator is an important driving force of the electric regulating butterfly valve, and its selection determines the actual on-site operation of the product. At the same time, the selection of electric actuators has some own selection criteria. Mainly from the operating torque, host structure, output shaft rotation, output speed, etc. to consider, […]
Field Application of Electric resilient seated Wafer Butterfly Valve
The electric resilient seated butterfly valve is actually a kind of electric control valve system. It is a high-performance valve upgraded from the ordinary butterfly valve category. It also uses electrical operation during operation. Therefore, the most obvious advantage of the electric resilient seated butterfly valve is that it is quite simple and easy to […]
How to replace valve packing for triple eccentric sealing butterfly valve
Although we are not focusing on valve packing during the procurement and use of triple eccentric butterfly valves, in fact packing has a great influence on the service life of the valve. If we find that the upper cavity is leaking during the pressure test, it is likely to be caused by the leakage of […]
Solution for accidental fall off of the valve plate of rising stem wedge gate valve
In the previous Tanghai valve knowledge, we have mentioned that if the working conditions are too bad or the gate valve purchased is from an unqualified small manufacturer, or for the rising stem wedge gate valve, the valve will suffer corrosion and wear during the opening and closing process. Or improper operation may cause the […]
Requirements of various sealing materials for pneumatic gate valves
This article would like to discuss with you some of the material requirements of pneumatic gate valves, including the material of the valve body, stem, stem bushing, nut, sealing surface and packing of the pneumatic gate valve. Each of them is an important component to ensure the good sealing performance of the valve. The quality […]
Precautions for the use of triple eccentric metal seated butterfly valve
Triple eccentric hard-sealed butterfly valves are generally metal seated butterfly valves, which have an eccentric metal sealing structure. Sealing forms include metal-to-metal sealing, stainless steel plate and graphite composite plate sealing ring to metal sealing, etc. The driving methods are mainly electric, manual, turbo rod transmission, pneumatic and so on. The triple eccentric hard-seal butterfly […]
Correct installation method of pneumatic gate valve
Good valve products also need correct use and maintenance to ensure a good working condition and service life of the product, and pneumatic gate valves are no exception. The working state of the pneumatic gate valve directly affects the operation of the engineering system. Pneumatic gate valves have been widely used in metallurgy, petrochemical and […]
How to extend the service life of stainless steel metal seated butterfly valve
In general, we are most worried about the problem of stainless steel metal seated butterfly valves is rust. This is the common concern of the majority of users for metal products. In fact, stainless steel material itself is not easy to rust, but stainless steel materials are also divided into five categories, such as ferritic […]