TH VALVE • PROFESSIONAL VALVE MANUFACTURER
GET IN TOUCH WITH US
Cell: 0086-185 2639 6136
0086-133 7031 7626
E-mail: tanghai@tanghaivalve.com
info@tanghaivalve.com
Web: www.tanghaivalve.com
Add: East of Guanghui Road, Beizhakou town, Jinnan District, Tianjin, P.R.China.
© Copyright 2020 Tianjin Tanghaidongyang Valve Co., Ltd. All Rights Reserved.
Top Valve Manufacturer, Provide the best solutions for valve projects.
Common failures of butterfly valves and the characteristics of installation
Common errors of butterfly valves: The rubber elastomer in the butterfly valve will tear, wear, aging, perforate or even fall off during continuous use. The traditional thermal vulcanization process is difficult to meet the needs of on-site repair. Special equipment is used for repair, which consumes a lot of heat and electricity, which takes time […]
Applicable occasions of butterfly valve
Butterfly valves are suitable for flow regulation. Because the pressure loss of the butterfly valve in the pipeline is relatively large, the robustness of the butterfly plate to withstand the pressure of the pipeline medium when closing should also be considered. In addition, the working temperature limit of the elastic seat material must be considered […]
How to choose the right butterfly valve (2)
However, the following problems still exist during the use of this butterfly valve: 1. Due to the multi-layer soft and hard laminated seal ring fixed on the valve plate, when the valve plate is normally open, the medium forms a frontal flush on the sealing surface. The soft sealing tape in the metal sheet interlayer […]
How to choose the right butterfly valve (1)
When the butterfly valve is fully open to fully closed, it turns usually less than 90°. The butterfly valve and the butterfly stem itself have no self-locking capability. For the positioning of the butterfly plate, a worm gear reducer must be installed on the valve rod. The use of worm gear reducer can not only […]
The main classification method of butterfly valve (2)
According to the connection method, the butterfly valve can be devided into four or five types: 1. Wafer type butterfly valve The butterfly plate of the wafer butterfly valve is installed in the diameter direction of the pipeline. The valve is fully open. Wafer type butterfly valve has simple structure, small volume and light weight. […]
The main classification methods of butterfly valve (1)
There are several classification methods of butterfly valves. According to the driving method (1) Electric butterfly valve (2) Pneumatic butterfly valve (3) Hydraulic butterfly valve (4) Manual butterfly valve According to the structure: (1) Center sealed butterfly valve (2) Single eccentric sealed butterfly valve (3) Double eccentric seal butterfly valve (4) Triple eccentric seal butterfly […]
The advantages and disadvantages of butterfly valves
Advantages of butterfly valve: 1. Convenient opening and closing, labor saving, low fluid resistance, and can be operated frequently. 2. The structure is simple, the external dimensions are small, the structural length is short, the volume is small, and the weight is light. It is suitable for valves with large diameter. 3. Mud can be […]
Structure and characteristics of butterfly valve
Butterfly valve is mainly composed of valve body, valve stem, butterfly plate and sealing ring. The valve body is cylindrical, with a short axial length and a built-in butterfly plate. Features of butterfly valve: 1. The butterfly valve has the characteristics of simple structure, small size, light weight, low material consumption, small installation size, rapid […]
How does a butterfly valve work?
A butterfly valve is a valve that uses a disc-type opening and closing part to reciprocate around 90° to open, close, or regulate the flow of media. Butterfly valves are not only simple in structure, small in size, light in weight, low in material consumption, small in installation size, small in driving torque, easy in […]
How to achieve internal and external anti-corrosion of pneumatic valves
Pneumatic valve using pneumatic actuators, for which Air (or other gas) pressure is the source of power. Air pressure acts on the piston or bellows diaphragm, which produces a linear force on the valve stem. Pneumatic actuator is a kind of Power-operated actuators (using pneumatic, hydraulic or electric power), can remotely adjust valves, or quickly […]